BELARUS-892 Tractor

The BELARUS-892 tractor is intended for various agricultural operations with mounted, semi-mounted and trailed machines and implements, for hauling operations.

BELARUS-892 tractor with front driving axle with bevel gear groups.

BELARUS-892.2 tractor with front driving axle with planetary-spur gear groups.

Environmental standard Stage 0.


  1. Especially set up for tropical countries secure long life of this tractor.
  2. Easy to maintain and servicing
  3. Long life spare parts supply guarantee
  4. Special training for operators for free


Engine Model D-245.5
Power, kW (h.p.) 65 (89)
Wheel arrangement 4х4


Technical characteristics

Type diesel engine with direct fuel injection with turbocharger
Model D-245.5
Power, kW (h.p.) 65 (89)
Crankshaft rated speed, rpm 1800
Number of cylinders, pcs. 4
Displacement, l 4,75
Maximum torque, Nm 397
Specific fuel consumption at operating power, g/kWh 235
Factor of torque backup, % 15
Fuel tank capacity, l 130
Clutch dry, single-disk
Gearbox mechanical, fixed-ratio
Number of gears: forward/reverse 18/4
Travel speed: forward/reverse, km/h 2,26-41,1/4,76-11,04
Rear PTO:
continuous I, rpm 540
continuous II, rpm 1000
ground-speed I, rev/m of travel 3,36
Hydraulic lift linkage
Remote-cylinder, with hydraulic lift, providing draft, positional, mixed and height adjustment of agricultural implement position.
Lifting capacity at suspension point, kg 3200
Maximum pressure, MPa 20
Pump performance,l/min 45
Hydraulic system capacity, l 25
Dimensions and weight
Overall length, mm 4120/4130
Width, mm 1970
Height to cabin top, mm 2850
Tractor base, mm 2450
Track, mm:
front wheels 1450-1970/1535-2120
rear wheels 1500-2100
Agrotechnical clearance, mm 510
Least turning radius, m 4,1/4,5
Fordable depth, m 0,85
Operating weight, kg 4150/4250
Tire sizes:
front wheels 13,6-20/360/70R24
rear wheels 16,9R38/18,4R34
Wheel arrangement 4х4

Additional options

  • Stage I engine (D-245.5S);
  • Metal-ceramic pads for coupling clutch;
  • Reverse reduction unit;
  • Ballast weights for rear wheels. Front ballast weights;
  • Creeper;
  • RLL draft control;
  • Compound hitch device (hydraulic hook, draw bar, pendulum);
  • Kit for twinning of rear wheels;
  • Additional seat;
  • Canopy frame, canopy base;
  • Upgraded design (plastic facing).


In sea containers.

Shipping costs depends on destination.


Upon request